December 16, 2019 1 min read

Finish - the final treatment or coating of a surface1.

The short answer is that there is no finish for all conditions/uses.  That being said here at CMM Offroad our principles include no compromise and fine finish.  While our canvas is most commonly aluminum alloy our choices for a finish start with none at all.  Powder coat or anodize would be the most common and are readily available globally.  US based and off shore manufacturers can deliver a finish that appears similar when new.  We use Cerakote thin film ceramic coatings.  They require trained applicators to use materials from the USA.  These coatings are a perfect match for our products.  Recently they featured our work.

https://www.cerakote.com/gallery/detail/54192/Cerakote-cerakoted-jeep-grab-bars-handles/


Leave a comment

Comments will be approved before showing up.